In this guide we will explain how to connect Brad Nailer to Compressor. Pneumatic nail guns have made life easier. Not only are they more affordable but also quite easy to use. However, using a pneumatic brad nailer requires connecting it to an air compressor to produce the pressurized air that is required by the nail gun to operate accordingly. Therefore, if you want to have a proper guide on how to connect a brad nailer to a compressor, you are exactly at the right place.
What is an Air Compressor?
An air compressor is kind of a tool that is used for powering whole lots of tools by producing pressurized air. It is used for tons of applications like powering paint sprayers, inflating tires, and powering various other pneumatic tools like brad nailers and sanders. What makes the pneumatic brad nailers a better choice than the battery-operated ones is that they are more affordable comparatively.
How to connect Brad Nailer to Compressor?
Now that you know what an air compressor is and why having hands on a pneumatic brad nailer is a better choice for DIY projects, here is a simple guide on how to connect a brad nailer to a compressor. Here are the things that you will need:
- Pneumatic tool oil.
- Air hose.
Step 1:
The first and foremost thing to do is to have proper safety checks to avoid any mishaps from happening. Here is what needed to be done:
- First, check the safety of the barrel that slides back and allows the trigger to engage and shoot the nail. If it is getting stuck, stop the process and check if there are any blockages.
- The second thing to do is to test the trigger. Since there is no air pressure yet, the trigger should be very loose with a lot of play.
- The third and last thing to check is the quick disconnects. It is done by pulling the collar back. The collar should snap back to its place.
Step 2:
Now comes the time of connecting the tools. By making sure that the quick disconnect collar is snapping back easily, connect the air hose to the compressor. Once it is done, the air-line is now rigid and has a lot of pressure to offer.
Step 3:
In the quick disconnect of the brad nailer, put three to four drops of the pneumatic tool oil. This oil will help in preventing jamming of the nail gun and lubricating its slides.
Step 4:
The final step is to connect the quick disconnector of the brad nailer to the air hose. While you perform this step, make sure that the collar clicks. Now plug in the compressor and turn it on so that it starts to pressurize automatically.
Major tips and warnings to take care of:
While all these steps seem quite easy to follow, always remember to take care of the tips and warnings that come with playing with electric tools. Here are some major points to look after when you connect and operate a pneumatic brad nailer.
- After each use, make sure to empty the gun.
- When you want to disconnect, start from the gun backward.
- At all, the threaded unions check for air leaks.
- Use both your hands while connecting to have proper control of the compressor and air hose.
- When you disconnect the hose from the compressor, hold on to it until the whole of the air is completely expelled.
- Always treat your nail gun with proper care and guidance as if it is always loaded and ready to be triggered to avoid any mishaps and accidents from happening.
You can search for many more guides and how-tos by simply visiting the relevant category of your interest.