How to make a pool vacuum using a garden hose? Cleaning the pool is one of the numerous duties of a pool owner. If your conventional pool vacuum is broken or you don’t have one, you may make a stand-in pool vacuum out of a garden hose. Due to the syphoning effect, the output end of a garden hose must be lower than the input end when used as a pool vacuum.
Place the intake end of a garden hose in the pool and suck on the exhaust until water begins to flow. Using the syphon principle, water will go through the pipe. The pipe’s intake end may be cleaned by dragging it over the pool’s bottom.
If you don’t have a pool vacuum connected to the pool pump, you might try using a garden hose as a makeshift vacuum to remove dirt from the pool floor. A garden hose is the best alternative to professional pool vacuum cleaners. It is a less costly option when a pool’s pump filter fails.

How Does A Garden Hose Pool Vacuum Work?
It may seem strange that a simple garden hose can suction away water from a pool. But if you understand what’s going on behind the curtains, everything will become plain as water. We’ve all sipped water via a straw. But have you ever wondered what causes water to flow at such a rapid pace?
In a nutshell, it’s due to negative pressure. When you suck into the straw, you naturally produce less pressure than the surrounding environment. The water eventually enters your mouth, and a garden hose pool vacuum operates similarly.
When an electric motor connects to a vacuum bag, the fan sucks as your mouth does with a straw. You also provide a long garden hose for safety, and that’s all there is to the fundamentals. However, remember that the narrower the intake valve, the larger the suction power.
How To Make A Pool Vacuum Using A Water Hose?
Following is a thorough step-by-step method to making a pool vacuum out of a garden hose.
1. Garden Hose Length:
It is critical to ensure that the garden hose is the proper length. For example, a little inflatable kiddie pool will not need a lengthy garden hose since the bottom of the pool is not that far away. You may use a garden hose of sufficient length to create a permanent pool with a different deep end and a more accessible shallow end.
2. Connection Of Vacuum Bag:
After determining the length, attach the vacuum bag to the right end of the garden hose. It will decide by the side of the garden hose attached to the suction valve. Consider utilizing home vacuum components to construct your pool cleaner if you want to make your pool cleaner.
3. Telescopic Handle:
The telescopic handle must be attached to the garden hose’s remaining end. If you have problems attaching the telescopic handle to the horse, you may use a rope to connect the end of the garden hose.
4. Length Of Telescopic Handle:
When attaching the telescopic handle to the garden hose, ensure that it reaches the pool’s bottom to offer a suitable surface area. The telescopic handle should not be too lengthy, requiring you to stoop down to connect the nozzle, and its length should correspond to your height. You can use a single screw to secure the telescopic handle at the top of the handle.
5. Inspection Of Pool Cleaner:
After you’ve ensured that your swimming pool is clean, you should have it examined by a professional pool cleaner. When you contact them, they will first check the pool’s condition, enabling them to determine what cleaning is necessary and how long it will take.
They also look for fractures or leaks in the pool walls or the filtration system. Following that, they will clean the pool and provide you with a thorough report on their job.
Examine the dirtier portions of the pool to ensure you have enough time to suck in the water via the garden hose line. As the pressure in the pool rises, water and debris are forced into the garden hose.
6. Remove Pool Vacuum:
After cleaning the pool surface, carefully remove the handmade pool vacuum. You must turn off the water circulation system to ensure that the water in the pool is quiet. It is necessary to detach the garden hose nozzle from the vacuum bag after taking the pool vacuum out of the water.
Ways To Enhance A Garden Hose Pool Vacuum:
Designing a simple garden hose pool vacuum cleaner that solves some limitations may be improved. The modifications will primarily increase the ease of use of the vacuum cleaner. The pipe diameter restriction will remain fixed.
Here are some basic tweaks to your pool vacuum to make it more user-friendly.
Put The Brush On The Pipe:
The hose may have a tiny, soft-bristled brush attached to its end, and it may use to remove stubborn spots off the pool’s bottom gently.
Extend Your Pole:
Extended poles and telescopic pool cleaning equipment are available at the pool shop. You may use a pool net with an extension pole if you have a pool.
Connect the hose’s outlet end to the extension pole so that it extends slightly beyond the pole’s end. This modification weights down the end of the hose, keeping it out of the water and allowing you to clean the pool without entering it.
Use Pantyhose To Filter Wastewater:
Putting the old adhesive on the hose’s outlet end and emptying the wastewater into the bucket will clean it up sufficiently to return to the pool, saving money on water consumption.
These modifications enhance the design and convenience of the hose-end pool vacuum, allowing you to remove sand from the pool’s bottom more efficiently.
Conclusion
Your filthiest pool spot is no match for a garden hose vacuum, which you can construct using a garden hose and a vacuum bag. The essential component is the vacuum bag, which generates suction through negative pressure.
You may create a pool vacuum at home using a garden hose without the assistance of a professional. All that’s needed to make the tool for cleaning is to follow the few actions we’ve outlined above.
The garden hose vacuum is incredibly easy to use since it functions similarly to a pool vacuum cleaner. After using the garden hose vacuum, unplug and clean the components before storing them.
You can check our blog post about Best Stainless Steel Garden Hose.