How to uninstall kitchen faucet without basin wrench: Just imagine a day in the kitchen without a properly functioning faucet. Alas! It will be quite a mishap and may show you a tough time in overall chores. In this condition calling a plumber may take much more of your time. So, what can be the perfect remedy for this aback situation? One solution is that you can yourself act as a magician and learn how to remove kitchen faucets without a basin wrench or any professional tools. Now the question comes; is it even possible? Of course, it is.
The only condition for making this DIY possible is that you also have a spare kitchen. Starting right from gathering the tools, replacing the faucet by disconnecting the hose and water lines, and finally reinstalling the new one -that’s how you can seamlessly perform the entire thing.
[acf field=”how_to”]
A step by step guide to remove kitchen faucet without basin wrench:
Step 1: Gather all of the valuable tools to make DIY successful
First of all, if you want to remove your kitchen faucet without a basin wrench, then you have to get some common tools that are readily available in every household.
- Standard wrench
- Screwdriver
- Clean cloth
- Gauge of tape
Step 2: Turn of the mains valve to reduce the mess
Here’s something quite important and still most of people overlook or forget to do this. Right after removing the faucet, water will start flowing, and your kitchen floor will be flooded with water if the main valve is not turned off.
If you want to complete your DIY with clean hands, make sure that you have turned off the main water valve before putting your hands on the faucet removal.
Step 3: Open the faucet valve to relieve the pressure in the tap
Even though you have turned the main water flow off, the faucet still holds some pressure inside. This pressure may cause a problem for you, later on, so you need to turn the tap on for some time. This will cause the trapped water to flow off, and then you can proceed with the process.
Once the extra pressure is gone, you will find it easier to remove the faucet, and it will also become lighter.
Step 4: Disconnect the water lines
Water lines are the connection between the faucet and the main water flow. Whether you are replacing your tap or fixing it, it is compulsory to disconnect the water lines. Ensure that you have disconnected the water lines, one for the cold water and the warm water.
Try to do this task smoothly and softly without creating any further damage.
Steps 5: Removal of faucet nut
Here, the whole process is discussed in detail using simple words to make it easier for you. If you are a DIY enthusiast, it is pretty obvious that your toolbox must have a socket wrench.
How can you differentiate the faucet nut? This is the central question that came to your mind, right? Just keep one point in mind that the faucet nut is the one that is holding the faucet in place and is prominent.
Once you find the nut, then you have to place the wrench on it carefully.
Now move the wrench counter clock wisely. If you find that these nuts are stiff and are not moving in place, then don’t try to force them. This is not going to help you, but this may break the wrench instead.
You have to go for some grease and make them smoother by applying some.
If your faucet is kept in place with screws instead of nuts, then, in that case, you will need a screwdriver to make your DIY function.
Step 6: Disconnect the hose
Here comes the most straightforward part of your DIY that demands minor chemistry in it. But wait, if you’re not doing it properly this may get messy. So try to keep a cloth or towel with you to make it simpler. You can skip this thing, but if you want to make your DIY 100% working, then we would say that you have to follow this as well.
The sole reason for making this step inclusive is to make the faucet hose clean and debris-free. Now clean the faucet and hose thoroughly and look for whether the faucet can be reused after a small replacement or is of no further use.
Step 7: Reinstallation of the faucet
If your faucet is OK to go with, then you can install the previous one, but if it is broken, then you have to get a new two-handle kitchen faucet that is efficient enough to work in the place of the previous one. You can get one of the Best Kitchen Faucets for Low Water Pressure at nearby stores or online.
How to install a two-handle kitchen faucet?
Your kitchen can not function without a proper working faucet with running water. So you have to get the new faucet installed accurately. So make your DIY meaningful follow some easy steps to reinstall the faucet without professional tools.
- Install the faucet hose smoothly.
- Put the faucet in place while keeping the nuts or screws safely.
- Now tighten the screws or nuts with a light hand.
- Connect the water lines and turn the main valve on. You are done with a fine working faucet.
Final Verdict on How to Remove Kitchen Faucet Without Basin Wrench
Being a DIY enthusiast, you will for sure have a simple wrench in your toolbox. And the availability of a wrench means you can proceed with the steps of how to remove the faucet without a basin wrench. Just follow the simple steps, and you will get your Kitchen tap working fine without waiting for a plumber to come and make your faucet work smoothly.