Untangling a chainsaw saw may not be as easy as you expect, but also, it is not too hard a job to be done. There is no blade, but metal teeth present on the chain to perform various cutting tasks. However, if you try to untangle a chainsaw without proper procedure, it can cause severe injuries. Whether you are using a gas-powered chainsaw or the best small chainsaw for cutting, there are many effective and easy ways for chainsaw blade untangling. Here is the best procedure for how to untangle a chainsaw blade at home.
[acf field=”how_to”]How to Untangle a Chainsaw Blade
Things Required to Untangle the Chainsaw Blade
Before you start the process, it is essential to collect the following accessories.
A Durable Table
Don’t forget to grab a durable worktable, wooden table, or any spare table that is not in use. A chainsaw blade may cause some damages or scratches on the table. So, make sure to use an old but robust table for untangling the chainsaw blade. You can also use the chainsaw on ground for this process but make sure there are no tiles or expensive mats.
Protective Goggles
When you are untangling an old rusty chainsaw blade loaded with dirt and nasty allergic germs, don’t forget to wear protective goggles. Make sure to protect your eyes as you can get a pair of goggles but not eyes.
Chainsaw Gloves
Wearing the best chainsaw gloves is important to protect your hands from injuries. However, if you don’t have chainsaw gloves, you can use work or leather gloves to protect your hands from deep cuts.
Chainsaw Lubricating Oil
Lubrication oil is best for the corroded and dirty blade of the chainsaw. The stubborn rust, grease, and dirt can cause serious issues when untangling the chainsaw blade. It is better to use engine oil or lubricating oil for the smooth process as such oils will slacken the chain connections effectively.
Toolset
The best toolset for home is always useful. Sometimes the chain is locked up in the blade, and you need some handy tools to remove it from your chainsaw. You need an Allen wrench or a screwdriver to take off the chain. These handy tools will help to remove the board and guide bar easily.
Now, you are ready with protective gears and essential tools, it’s time to untangle a chainsaw blade.
Untangling Chainsaw Blade Process
Prepare the Chain
Typically, you don’t know the condition of the chain, such as if it is jammed in the chainsaw, is it new or old? Let’s take a look at each possibility one by one.
- Jammed in the Chainsaw
If the chain is jammed, use tools like an Allen wrench or screwdriver to open the small or large chainsaw to get the chain off.
- For old Chain
You can use lubricating oil to make the chain smooth. Never sprinkle the oil here and there to prevent slipping. If the chain is too rusty, give it a proper oil bath.
- For New Chain
Make sure to wear protective gloves or any durable gloves to avoid sharp blade edges and prevent your hands from nasty cuts.
Finding Loops of the Chain
Most people get puzzled at this starting point. Well, all you need is to find two opposite loops of the chain. After finding them, put your hands on each loop and hang it down by holding the loops with your hands.
If your chainsaw blade is not in too much complicated untangling condition, it must be solved by now. However, if it is not, you still have to decrease the complication of the tangles.
Converting Two Loops Into Single
It’s time to make some efforts to convert two loops into a single one. Keep making one loop bigger, and it will become one single loop after some time. Make sure to keep your hands on both opposite loops and use slack on the chain for making the chain larger.
Untangling the Chainsaw Blade
After making one big loop, it’s time to untangle the chainsaw blade. However, it is essential to keep both hands on the chain and find out the lowest part of it. After discovering the lowest part, take it exactly straight down in a vertical position. Now you can conveniently lift the part and untangle the chain, thanks to the gravitational force.
When you provide maximum energy against gravity, it automatically starts to open the distorted parts of the chain. To open all these distorted parts, make sure to follow this step.
Spreading Parts One By One
If you are still facing any issues after applying these techniques, it’s time to go deeper. You have to untangle each distorted portion by focusing on every part. Spread each one of them to make the process less complicated and you will find that the messy distorted loops part is gone.
Useful Tips for Maintaining your Chainsaw
- Never cut anything without wood as it will seriously damage the chain and also the chainsaw.
- Make sure to lubricate the chainsaw blade to keep it in smooth condition.
- Don’t forget to maintain the fine tensioning modification into the chain and bar to improve the life of the chain.
- If you are a new user, it is advised to go with the low kickback chain.
- Put a protective cover on the bar when you are not using a chainsaw.
- In order to prevent dropping down the chain, always check the chain tensions.
Final Words
Chainsaw is one of the most versatile cutting tools on the market. However, it is essential to take care of the tool for the best performance. Following these techniques will surely help you to untangle your chainsaw blade. We strongly recommend wearing protective gloves and goggles before starting the procedure to protect your hands and eyes. For best results, don’t forget to lubricate the chainsaw after using and storing it.
![Best Chainsaw Under $200 – [2022] Reviews and Buyer’s Guide](http://bestproducthunter.com/wp-content/uploads/2021/02/Best-Chainsaws-under-200-150x150.jpg "Best Chainsaw Under $200 – [2022] Reviews and Buyer’s Guide")
